Universal bench seat OKB for two people for every panel van from 2500 kg

• Universal bench seat
• For two people
• Isofix
• Quick installation/removal
• Two Isofix child seats fit next to each other

Bench seat for two people based on a modular seat belt support with integrated three-point belts and Isofix child seat holders, expandable with tested headrests. For better seating comfort, the backrest can be mounted at a slight angle. (Headrests are included in the scope of delivery!)

For vehicles with a height difference to the cab or platform, a 120 mm elevation kit is included in the scope of delivery

The belt support is installed in the vehicle using three aluminum rails and can therefore be easily removed again if required. The aluminum rails are glued to the vehicle floor and additionally bolted in the rear area.

You will need the DTC certificate to register the seat in the vehicle registration document. You can also find this DTC certificate in our webshop. (For vehicles with an unladen weight of at least 2500 kg)

An ECE R14.07 (seat belt anchorages), ECE R17 (seat strength) and ECE R16 test certificate is enclosed. It documents the test in the Ford Transit and indicates that the tests can be transferred to other vehicles. (the results are representive also for other types of vehicles). We recommend clarifying the installation situation with the responsible STVA beforehand.

In addition to the belt buckle with 2 three-point belts, Isofix holders and backrest with holder for headrests, the delivery also includes:
- Height increase kit for additional height of 120mm: Item no. 595002
- Seat cushion (supplied with cover and two headrests): Item no. 595005
- Installation kit consisting of: 3x aluminum profiles, each 1250mm long

Important!

Fabian: I have also installed this seat in my latest bus.
The DTC certificate must be signed and stamped by an "appropriate" company. (Camper conversion companies, car garages, etc.)
So if you install it yourself, you must have a company that "approves" and stamps it or, even better, a trained craftsman with a company in the automotive industry installs it.
I installed this seat myself in a Ducato, including the elevation.
The adhesive supplied is only sufficient if the rails are glued to a flat surface. The adhesive comes in a bag for professional cartridge presses.
So if you are installing this yourself and the floor has "beads", e.g. in a Ducato, we recommend approx. 13 pcs. Dekasyl MS-5 and a cartridge gun with battery. (I did it with a normal cartridge press, 3 people for about 30 minutes, that was exhausting).

Technical data