This kit fits all T5 and T6 pop-up roofs that have roof rack rails. (California: Ocean, Beach etc.)
Scope of delivery:
-1-2x solar panel 135W (ETFE-coated)
-1-2x sheet metal for mounting
-1-2x DEKASYL adhesive
-1x MPPT Victron charge controller
-1x special cableBLACK with spiral (2m - spiral - 6m)
-1x wiring box for on the roof (waterproof IP67)
-1x Set of sliding blocks, screws and cuvettes
-1x Solar extension cable black 1m
-3 pcs. wire connectors
-2m stranded wire 4mm2 red
-2m stranded wire 4mm2 black
-3 pcs. 4mm2 crimp cable lugsM8
-cable ties
What else you need:
- Cartridge press
- Degreaser (brake cleaner or similar) with cloth
- Basic tools (no special crimping pliers etc. required)
Estimated installation time:
2 people 2h-3h
Important: The modules must be glued 18-24 hours in advance!
--> In addition to the additional material required, a larger charge controller is also supplied with the larger system.
Solar module:
135W:
Important properties
- Flexible (up to a curvature of 30%)
- High-performance mono cells
- Efficiency of 20%
- Ideal for caravans and boats
- Extremely resistant
Type: Monocrystalline silicone
Size: 670*1090*2mm
Number of cells: 36
Power: 135W
Solar cells: Sunpower (Made in USA)
Cable: 90cm
Connection box: Front side
Installation: can be glued or screwed
Technical Data:
| Maximum power (+/- 5%) - Pmax | 135 W |
| Open circuit voltage - Voc | 23.3 V |
| Short-circuit current - Isc | 7.36 A |
| Maximum Power Voltage (Vpm) | 19.8 V |
| Maximum Power Current (Imp) | 7.36 A |
| Maximum System Voltage | 600 VDC |
| Length | 1090mm |
| width | 670mm |
| height | 2mm |
| Number of cells | 36 |
Sheet metal:
The aluminum mounting plate was designed by waerchzueg.ch and is produced in Switzerland.
It has slotted holes to compensate for any tolerances during installation. It also has several cable tie attachment points.
The surface is anodized.
MPPT charge controller with Bluetooth:
Smartsolar 75/15 charge controller with integrated Bluetooth
The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up,
The most important technical features at a glance:
- 15A max. charging current, suitable for 12V and 24V batteries
- Nominal PV power for 12V systems: 220W
- Nominal PV power for 24V systems: 440W
- 15A load output
- high peak efficiency of 98
- Freely programmable battery charging algorithm (via the free Victron Connect APP)
- Programmable light dimming functions (via the free Victron Connect APP)
- Ultra-fast maximum power point tracking
- Max. PV open circuit voltage: 75V
- Charging algorithm: multi-stage, adaptive
- Integrated Bluetooth module
Ultra-fast maximum power point tracking
Intelligent load output
Battery Life: intelligent battery management
If the solar charge controller is not able to charge the battery to its full capacity within a day,
The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises




























