The first external can with Queensize Camper stainless steel components! The mixer allows you to regulate the temperature and volume directly on the outside of the vehicle and a Queensize Camper shower hose is connected to the quick coupling (not included). If you have not yet installed shower set 1 inside the vehicle, you can use shower set 3, for example.
Installation:
The empty socket comes without holes, you make these yourself according to your wishes, 14mm for the bulkhead coupling and 32mm for the mixer. You will receive a template with an installation suggestion as a PDF with the order confirmation, or you can find it in the download area below. Simply cut it out and place it inside the box. Then drill through the two center points with a small drill and then, ideally from the other side, drill the holes to size using a step drill, for example.
The box is compatible with the Fawo lids (the black lid is included). However, if you would like a different color, you can buy lids in other colors in specialist shops.
Antifreeze
The following applies to all Queensize Camper showers: To make the system winter-proof and prevent frost damage, all pipes and components must be completely drained. Ideally, this should be done in the direction of the pump. The cartridge must first be opened and set to the middle position, the hose must be connected and the volume regulator on the shower fully opened, then the water pipes must be blown through from the pump side. Then disconnect the hose and let the water run out. Leave the cartridge open in the middle position during winter storage.
Scope of delivery:
- QC mixer with 3x connection hoses (30cm long with 10mm hose nozzle)
- QC bulkhead coupling with 10mm hose nozzle
- Box and lid in black with foam rubber seals
- Drilling template as PDF