- Retractable camper tap,disappears completely into the sink
- NEW: directly with switch for the submersible pump
- made of high-quality stainless steel (SUS304)
- Connection hose with integrated non-return valve
- perfectly suitable for theQueensize Camper stainless steel sinks
Cold water tap, retractable, made of high-quality stainless steel
Here, elegant design and high-quality materials meet newly conceived functionality. This cold water mixer tap is completely retractable* in the sink and helps to save space. The matching Queensize Camper sink can be fitted with the rim UNDER the worktop, creating a completely flat surface in combination with the mixer tap, which can be covered with the worktop cut-out.
Swivel and folding
With a swivel range of 360° or 90°, the mixer tap can be fully retracted into the QC sink. Without a disturbing tap on the worktop, this opens up a wide range of new uses, even where the (covered) sink is located - whether as a storage surface or if, for example, the bed is to be pulled out over the surface at night, etc. pp.
Now with a new latching function every 45°. And in the event that the spout should sink to the bottom of the sink during travel, a rubber ring is installed at the spout end.
Switch
The on/off switch with latching function is located directly on the rotating part. This has a rating of 5A at 230V and switches your submersible pump directly on or off. It is of course IP67 waterproof and its position in the sink means that your worktop will not get wet when you operate your tap.
Volume control (optional)
You can optionally configure a new aerator with the following functions
:- Rotatable: so you can get into every corner of your sink and clean it comfortably
- Two-jet nozzle: as with the Queensize Camper shower set, this aerator is now also equipped with two jet types
- Volume control: The aerator is equipped with a volume control to reduce the outflow volume. This allows you to adjust the jet continuously between 20 and 100%, regardless of the temperature setting of the mixing cartridge.
Connection
Another new feature is the 90° angled connection area - so you only need very little installation space next to the sink wall.
The connection is made via a 10 mm hose nozzle on the flexible hose. A non-return valve is installed directly under the hose nozzle so that the water does not keep running back into the canister through the submersible pump and you have to wait longer each time until the water returns. Of course, you can also simply remove this non-return valve.
A 32 mm circular hole drill is included. The diameter is the same as that of the Queensize Camper hot water fitting, so you can upgrade to the hot water version at a later date if you need to retrofit a hot water supply.
System pressure
The product has a maximum system pressure of 4 bar and a recommended minimum pressure of 1 bar. When using a submersible pump, you should use a pump with e.g. 2.1 bar.
Dimensions
Height approx. 265mm
Projection 210mm
Hole diameter 32mm
Scope of delivery
- Folding cold water tap with standard aerator
- Integrated switch with connection cable (2 x 0.75mm² / length approx. 30cm)
- Hole circle drill 32mm
- Replacement guide ring
- 30cm connection hose with 10mm hose nozzle and non-return valve
Important Operating note: When the cold season arrives with the possibility of frost, please make sure to drain the tap completely of water! The best way to do this is to blow air through the outlet, remembering the non-return valve - i.e. in the direction in which the pump is also pumping. And/or unscrew the aerator so that all the water can run out of the spout when the spout is swiveled into the sink.