U-POL RAPTOR premium, super strong and durable 2K urethane coating against rust, corrosion, salt, moisture and extreme temperatures.
Restores even the most worn and uneven truck beds or truck floors to the previous finish.
Dries extra fast and ensures scratch and stain resistant surface that is U.V. resistant.
Strong adhesion, waterproof, flexible, helps to soften noise and vibration.
The offer includes : 4 x 750ml bottles and 1 bottle of hardener + complete instructions
1 liter covers an area of approx. 4.2 m²
Very practical to use thanks to the pre-dosed bottles
Pour, shake, apply
Color: selectable and can be used with all nitro-based paints. / Very resistant and durable finish !!!!
!!!Spray gunnot included !!!
!!
RAPTOR can also be applied with arolleror brush !
!!APPLICATION:
- Remove all loose parts and rust from the surface to be coated
- Sand the surface with P80 to P180 grit sandpaper
- Clean and degrease the surface again
- Scuffed areas should be primed with primer, e.g. with 2 coats ofU-Pol ACID8
- We strongly recommendU-POL GRIPas an adhesion promoter for all substrates, including hard-to-reach areas.
MIX THE PAINT:
To achieve the best results, solvent-based paints from basecoat mixing systems should be used. RAPTOR can also be tinted with solvent-based basecoats and solvent-based, isocyanate-cured two-component solid colors. If two-component paints are used, these must also be activated before use. Do not use water-based systems for tinting RAPTOR.
Simply pour 250 ml of hardener into the Raptor application bottle, close the lid again and shake the contents vigorously for at least 2 minutes, add color and shake vigorously for another 2 minutes.
Only mix one bottle of RAPTOR at a time. Clean the spray gun with acetone between mixing.
Application videohere watch.












