Connection bracket set for the QC mixer QC-300-11 (from year of manufacture 2025)
This specially developed connection bracket set is only suitable for the QC mixerQC-300-11 from model year 2025- recognizable by the twoM4 screwssupplied with the mixer. With this set, the required installation space can be further reduced and a12 mm quick coupling systemcan be optimally integrated.
To use a 12 mm quick connector (e.g.John Guest,Reich UniQuickorCarbest), the existing hose nozzle can simply be cut off. Important: Cut off the cut edge cleanly, deburr carefully and clean the elbow thoroughly - ideally with compressed air - so that no brass particles get into the water system.
All three brass brackets are carefully inserted into the M10x1 openingsof the mixer. The two M4 Allen screws are then secured with lock washers (supplied with the mixer). The brackets can be freely aligned.
Note:
Even after tightening, the brackets can be turned slightly - this is normal. The screws are only used to secure the brackets against the water pressure and prevent them from being pushed out of the mixer.
Not compatiblewith other taps or mixers - suitableonly for the shower set from year of manufacture 2025.
Scope of delivery:
- 3 × mixer connection brackets
-No M4 screws included- these are already included with the mixer.

