Gone are the days of cumbersome crimping for old-fashioned fuse blocks. Our fuse block uses modern Wago lever terminals instead of screw connections. This not only makes the connection more secure, but also much easier to install as there is no need to crimp the cables. Anyone who has ever crimped cables in a small corner under the bed or in a cupboard will really appreciate this tool.
- The FUSY is approximately the same size as standard 18 channel fuse blocks.
- It is possible to connect any cable from 0.5mm2 to 4mm2. It doesn't matter whether it has a ferrule, a rigid cable or a flexible cable.
- Each fuse circuit can handle a maximum of 30A. Please note the total load and the cable cross-section.
- Compared to cable glands, the cables are fixed with springs and cannot be tightened too tightly or too loosely. The connection can also not come loose due to vibration.
- By using Wago lever terminals, you no longer have to crimp each cable individually, which saves a lot of time during installation.
Technical data
- Total current: max. 200A
- Peak loads 200A (30min)
- Continuous load: 100A
- Current per fuse circuit: max. 30A
- 18x fuse channels (standard ATO vehicle fuses)
- 36x status LEDs → bidirectional, also detects charger fuse failure
- Cable cross-section:
- 10x up to 4mm² Stripping length 9 ... 11 mm
- 8x to 10mm² Stripping length 11 ... 13 mm
- Cable types: flexible cable, wire end ferrules, rigid cable
- Connection terminal up to M6 screw terminal
- LxWxH: 213x117x33mm
- 12V & 24V suitable
- Operating temperature: -25°C to 65*C
Scope of delivery:
- 1 x Pekaway FUSY Maxi fuse block
- 2 x M6 lock nuts
- 2 x silicone terminal covers
- ATO - automotive fuses (according to the number of fuse channels)






