DeltaVan outer angle for roof rack superstructures for a clean corner finish, for an official look!
- Parts made of 3 mm stainless steel, solid design
- Black powder-coated
- With holes D=8.5mmfor M8 screws
- Can be screwed into the profile withslot nuts(accessory) and creates a stable corner connection that can also forgive the odd millimeter tolerance.
- Fixed points for airline accessories: Practical holding point for tensioning straps, nets, awnings or similar items
- The length of the aluminum profile can be 85-100 mm shorter than the outer edge would normally be.The ideal dimension is 90 mm shorter on each side.
- The leg dimension of the angle is exactly 163mm measured from the outside, with 165mm you are on the safe side so as not to collide with other attachments.
Scope of delivery:1x outer corner and 2x upper/lower part in the ordered profile dimension.Supplied without sliding blocks and screws.
You need per corner:
40x40mm:
12x NUTS
12x screws (available in a pack of 20)
(see 2nd picture, not all holes are needed)
40x80mm:
16x NUTENSTEIN
16x screw (available in a pack of 20)