Output waveform: pure sine wave
Battery undervoltage alarm & cut-off
Overload protection
Overvoltage protection
Reverse polarity cut-off
Overtemperature cut-off
Output short-circuit protection
Thanks to a special intelligent electronic system, the device starts up slowly and therefore does not place any load peaks on the battery.
The housing can be earthed to the vehicle.
Cooling fan: operates at 20% AC load / with temperature control
Input voltage: 12V
Output voltage/frequency: 220VAC 50Hz±3
USB connection: 5V 2.1A
Output power: 2000W continuous power 4000W peak power
Efficiency:> 90%
Size: 345*230*108mm
Weight: 4850g
Incl. German and English instruction manual
Differences between high-end inverters and cheaper inverters:
- The sine wave is over 90% for the high-end product, we have no measurements for the cheaper inverter. (This means that the sine wave is not modified, but not as "beautiful" as the high-end)
- The fuses are on the outside of the high-end product and on the inside of the cheaper product. (In the event of a defective fuse, the inverter must be unscrewed on the cheaper inverter)
- The fuses are on the outside of the high-end product and on the inside of the cheaper product. (In the event of a defective fuse, the inverter must be unscrewed on the cheaper inverter)
- An external "remote-control" switch can be ordered with the high-end product so that the inverter can be conveniently switched on or off remotely.
- With the high-end product, the housing can be earthed via the ground connection. With the cheaper product, this must be done via the negative pole.
- With the high-end product, the housing can be earthed via the ground connection. With the cheaper product, this must be done via the negative pole.
- The high-end inverter has higher quality components, which is also reflected in the weight and size of the product.
Buying decision?
Buying decision?
Short trips, laptop with you from time to time or the inverter is not used often?
--> The cheaper version will do
--> The cheaper version will do
Do you want to go on longer trips, live in a camper and/or cook inductively? You want to stow the inverter in the technical box and switch it off remotely? You have an Alp or similar and the inverter sometimes runs for days on end?
Then use the waerchzueg.ch
--> Highend Inverter!
Then use the waerchzueg.ch
--> Highend Inverter!
Inverter has no byPass
