The wall outlet from Queensize Camper ("shower set 2") meets high quality and design requirements for the conversion of motorhomes or boats.
- Made entirely of stainless steel
- Great flexibility during installation
- Quick coupling suitable for the Queensize Camper shower sets, with shut-off function
- Stainless steel look quick coupling (nickel-plated brass)
- With 30 cm flexible hose with 10 mm hose nozzle
Camper shower / shower set from the Queensize Camper brand - exclusively from tigerexped
Do you also value high-quality equipment in your camper and want to avoid plastic installation parts? This stainless steel wall outlet is impressive in terms of both quality and design and underlines your demands for professional fittings.
Wall outlet bend as individual part
To allow the greatest possible flexibility when fitting, the wall outlet elbow is also available individually in the 90 degree version and can be used as a supplement to the hot water shower (item no.: 36560), for example. Or in combination with shower set 3 (art. no.: 36562) as a "cold water" shower set without a hot water mixer.
Installing the wall outlet
The 90° wall outlet is installed through a hole circle of at least 21 mm and fastened with a nut/washer/flat gasket. An O-ring is integrated on the inside of the rosette, which seals directly to the shower wall.
For wall thicknesses up to max. 15mm
A 30cm flexible hose is screwed into the back of the wall outlet and connects to the water system via a 10mm hose nozzle.
If you also have to "bend" the hose by 90 degrees directly behind the outlet, you need at least 55mm so that the hose does not kink, measured from the front of the shower wall.
The quick coupling to the hose has a shut-off function, i.e. it closes automatically when the hose is disconnected. The wall outlet has the standard household thread M10x1. The standard "armored hoses" fit here.
Wide range of applications
If you need a nice quick connection to pump water from a river or spring, for example, then add the quick coupling "plug" (item no.: 36563) to the wall outlet. A 10 mm hose can then be connected to this with a hose clamp.
Scope of delivery:
- Wall outlet with quick coupling
- 1x connection hose
System pressure
A maximum system pressure of 4 bar and a recommended minimum pressure of 1 bar apply to all Queensize Camper products.
Frost protection
Special frost protection measures for Queensize Camper showers: To winterize the system and prevent frost damage, all pipes and components must be completely drained. Ideally, they should be blown out in the direction of the pump. The cartridge must first be opened and set to the center position, the hose must be connected and the volume regulator on the shower fully opened, then the water lines must be blown through from the pump side. Then disconnect the hose and let the water run out. Leave the cartridge open in the middle position during winter storage.