- Length: approx. 1 meter (995 mm)
- Rail width: 42 mm
- Installation height: 10 mm
- Hole diameter: 20 mm
- Hole/grid spacing: 25 mm
- Material: Aluminum -black
- Weight: 530 gramm
- Made in Germany
Pre-drilled airline rail semicircular profile - 1 meter
This airline rail is already pre-drilled with holes for fastening.
The airline lashing rail can be used in conjunction with the single stud, automotive and double stud fittings in accordance with DIN 75410, ISO 27955 and ISO 27956.
With the Quattro Stud fitting, the airline rail can even be used in accordance with DIN EN 12640.
Airline rails are used in conjunction with locking bars, lashing straps or end fittings to secure loads.
The following load capacities are achieved with the following fittings:
Single Stud Fitting ISO 27956 300 daN
Automotive Fitting 2 - Kerl 500
ISO 27955
DIN 75410-1 / ISO 27956
350 daN
400 daN
Double Stud Fitting - Kerl 1000 Double end fitting - Kerl 1000
ISO 27956
DIN 75410-1
350 daN
400 daN
500 daN
Quattro Stud Fitting
ISO 27956
EN 12640
800 daN
1000 daN
The above permissible load capacities are achieved under the following conditions:
An important point when installing an airline rail is the fastening in the substrate.
Depending on the nature, material composition and thickness of the substrate surface, different values are achieved.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be placed at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 with 25.4 mm grid)!
Screws with a strength of at least 10.9, with self-locking nut and washer must be used!
The installer of the load securing equipment is responsible for the installation and the resulting possible load!
Explanation of the ISO and DIN standards:
ISO 29755 = Lashing point standard for cars
ISO 29756 = Lashing point standard for vans
DIN 75410-1 = Lashing point standard for flatbed vehicles up to 3.5 t
EN 12640 = Lashing point standard for flatbed vehicles over 3.5 t
The matching end cap for this profile: Art. A201913
