200Ah LiFePo4 battery, 12V, incl. BMS and main switch as well as Bluetooth
This lithium battery has everything you need. A smart BMS regulates the battery and relieves you of most of the "maintenance" of the battery. We only recommend that you switch off the battery when not in use and either keep it on the charger at all times or fully charge it every 2 months.
The batteries have Gotion cylindrical "car-grade" cells installed. Naturally A-grade.
Gotion cells are one of the higher quality options on the market. They offer good energy density, high safety and a long service life. Gotion is a partner of a major German vehicle manufacturer.
We have made sure that the battery has a main switch so that you can switch off the battery when you don't need it. This means that self-discharge is extremely low. Nevertheless, please fully charge the battery at least every 2 months. (This actually applies to all LiFePo4 batteries)
Various apps are available free of charge via Bluetooth to view the battery information. One of them is linked on the product via QR code.
The 200Ah LiFePo4 battery is one of our best-selling capacity sizes, as it "almost all consumers" such as: LED lighting, USB charging (cell phone, tablet), water pump, cool box or fridge, laptop can easily cover. A 6L-15L water boiler can also be easily connected.
An induction plate can also be connected.
With two of these batteries you have 400Ah capacity, which is sufficient for double induction* and all the above-mentioned consumers. (* Attention, only special induction plates with max. 2800W, as we have in our range)
There are some applications where you need more capacity, e.g. if you live in a camper in winter or want to go on a world trip or if you install an air conditioning system. Here you can use 2x 200Ah or check with us whether 1x 200Ah is sufficient.
This battery has a continuous discharge current of up to 200A, i.e. 2600W. You can therefore draw 2600W at the same time. This should be limited to 10 - 15 minutes.
The battery heats up when such currents flow, but this is sufficient to boil water, for example. If you want to cook longer and a lot with induction, take 2x 200Ah, then you have enough reserve to draw up to 5000W for longer. (Draw 5000W until the batteries are empty).
We recommend ordering these battery clamps 1x per battery: A202137
This is the matching battery holder: A201669
Battery instructions: Here
| Battery capacity | 200Ah (2560Wh) |
| Nominal Volt | 12.8V |
| Max.Charging end voltage | 14.6V |
| Recommended charging current Max. | 75A |
| Charging current Max. | 100A |
| Continuous discharge current Max. | 200A |
| Discharge current 30Sec. Max. | 205A |
| Internal resistance | <30mOhm |
| Charging cycles | > 4'000 at 80% usage |
| Cut-off voltage | 9.6-11V |
| weight | 19.1Kg |
| Dimensions L x W x H | 485 * 185 *245mm |
| Charging temperature | 0°C - 45°C |
| Discharge temperature | -10°C - 65°C (core temperature in the battery) |
| Overcharge protection | Yes |
| Undervoltage protection | Yes |
| Temperature protection | Yes |
| Automatic balancing | Yes |
| Bluetooth | Yes |
| Tests | EN 55032 : 2015/A1:2020 and EN 55035:2017/A11:2020 and 47 CFR FCC Part 15, Subpart B Ansi C63.4:2014 and UN H7 and H7 |















