120Ah LiFePo4 battery, 12V, incl. BMS and main switch as well as Bluetooth
This lithium battery has everything you need. A smart BMS regulates the battery and takes care of the battery for you as far as possible. We only recommend that you switch off the battery when not in use and either keep it on the charger at all times or fully charge it every 2 months.
The batteries have Gotion cylindrical "car-grade" cells installed. Naturally A-grade.
Gotion cells are one of the higher quality options on the market. They offer good energy density, high safety and a long service life. Gotion is a partner of a major German vehicle manufacturer.
We have made sure that the battery has a main switch so that you can switch off the battery when you don't need it. This means that self-discharge is extremely low. Nevertheless, please fully charge the battery at least every 2 months. (This actually applies to all LiFePo4 batteries)
Various apps are available free of charge via Bluetooth to view the battery information. One of them is linked on the product via QR code.
The 120Ah LiFePo4 battery is our best-selling capacity size, as it is able to power "normal consumers" such as: LED lighting, USB charging (cell phone, tablet), water pump, cool box or fridge and hi-and-there a laptop can easily cover. A 6L water boiler can also be easily connected.
An induction plate can also be connected, but you need to clarify how often this is needed.
With two of these batteries you have 240Ah capacity, which is very sufficient for double induction* and all the above-mentioned consumers. A laptop can also be connected here with "higher consumption", such as home office, video editing and other intensive uses. (* Attention, only special induction plates with max. 2800W, as we have them in our range)
There are some applications where you need more capacity, e.g. if you live in a camper in winter or want to go on a world trip or if you install an air conditioning system. We have larger batteries for this and will be happy to advise you.
This battery has a continuous discharge current of up to 150A, i.e. 2000W. You can therefore draw 2000W at the same time. This should be limited to 10 - 15 minutes.
The battery heats up when such currents flow, but this is sufficient to boil water, for example. If you want to cook longer and a lot with induction, take 2x 120Ah, then you have enough reserve to draw up to 3000W for longer. (3000W draw until the batteries are empty).
We recommend ordering these battery clamps 1x per battery: A202137
This is the matching battery holder: A301454
Battery instructions: Here
| Battery capacity | 120Ah (1536Wh) |
| Nominal Volt | 12.8V |
| Max.Charging end voltage | 14.6V |
| Recommended charging current Max. | 75A |
| Charging current Max. | 100A |
| Continuous discharge current Max. | 150A |
| Discharge current 30Sec. Max. | 155A |
| Internal resistance | <30mOhm |
| Charging cycles | > 4'000 at 80% usage |
| Cut-off voltage | 9.6-11V |
| weight | 10.5Kg |
| Dimensions L x W x H | 355 * 175 *188mm |
| Charging temperature | 0°C - 45°C |
| Discharge temperature | -10°C - 65°C (core temperature in the battery) |
| Overcharge protection | Yes |
| Undervoltage protection | Yes |
| Temperature protection | Yes |
| Automatic balancing | Yes |
| Bluetooth | Yes |
| Tests | EN 55032 : 2015/A1:2020 and EN 55035:2017/A11:2020 and 47 CFR FCC Part 15, Subpart B Ansi C63.4:2014 and UN H7 and H7 |













