Power (W): 400 (from approx. 18 degrees to a pleasant shower temperature of 32 degrees in approx. 15 minutes)
Storage / tankless: Storage
Voltage (V): 12
Connection: G1/2 screw thread incl. 2 adapters for 10mm water hose.
Standard water hose for motorhomes for 10mm fits on it. Heat hose in water, attach, allow to cool.
Cable length: 1.4m
max. 75Grad
Attention, 2 straight adapters are included.
If you need angled ones, please order 2xTHESEin addition.
- Important, connection:
- Keep the original cable from the boiler short, max. 50cm. (otherwise you will have a large loss)
Crimp crimping cable lugs onto the boiler cable and crimp the connection cable up to the fuse (60A) 10mm2, max. 4m, also crimping cable lugs. Then make the connection with these adapters: (you can find themhere
Ground: See pictures
- I have installed this boiler myself and we shower (2 people) with it.
- 10 liters are heated up in approx. 25 minutes and the consumption is approx. 12Ah.
- For 2 people approx. 14 - 19Ah to shower comfortably at 32 degrees. (Experience with outside temperature of approx. 16-18 degrees)
- The boiler can be switched on via a relay switch (or a switch with >400W (40A) continuous power). You can therefore install the boiler in such a way that you can no longer (easily) reach it and place a switch at the front. It then heats up to the last set temperature.
-
Capacity: 10L (enough for 2 people to shower, waiting time between showers approx. 5 minutes)
Installation: With bracket
Certification: CE, ROHS, CCC
Power source: Electric
Maximum pressure: 0.4Mpa / 4 Bar
Waterproof: IPX4
Color: White
Use: Motorhome, caravan, van
Heating element: Stainless steel/enamel
Tank: Enamel - Dimension: LxWxH 600x260x260mm



