This charger can charge 2 batteries of the same type at the same time, each with a charging intelligence. Volts and charging current are always shown on the display for the lower battery.
(For example, if one lead battery is fully charged to 100% and the other to 20%, the charging curve for the full battery goes into "float" mode and for the other 20% battery, the charger charges according to the display).
Charger 20A
Input voltage range 190-265VAC, 50Hz
Bulk / absorption charge 14.2/14.6/14.8 DC Switchable (depending on modes)
Trickle charge 13.2/13.5/13.8 DC / Lithium: 13.5 +/- 0.2V
Max. DC output current 20A
Output ripple <50mA under full load
Max. Efficiency 88%
Charge regulation 1.5% at output current, no load up to full load
Ventilation Fan thermally & current controlled (quiet)
Dimensions: 176 x 175 x 95 (LxWxH)
Connection kit from charger to battery, incl. fuse: A301952
Charger 40A
Input voltage range 190-265VAC, 50Hz
Bulk / absorption charge 14.2/14.6/14.8 DC Switchable (depending on modes)
Trickle charge 13.2/13.5/13.8 DC / Lithium: 13.5 +/- 0.2V
Max. DC output current 40A
Output ripple <50mA under full load
Max. Efficiency 88%
Charge regulation 1.5% at output current, no load up to full load
Ventilation Fan thermally & current controlled (quiet)
Dimensions: 226 x 175 x 95 (LxWxH)
Both chargers incl. mounting option on the side for screws. (4x)
Output: 2x DC minus and 2x DC plus terminals up to 25mm2 cable.
On/off switch at the 230V input.
Scope of delivery:
Charger
CH cable 230V
Operating instructions
DC cable red/black incl. terminals for connecting to the battery (0.5m)
Spare fuses
(At least 10mm2 cable should be used for 20A and 16mm2 cable for 40A, up to approx. 3m in length, otherwise please recalculate)








