{"product_id":"trigaspro-multi-gaswarner-carpro-tec","title":"TriGasPro multi-gas detector - CarPro-Tec","description":"\u003cp\u003eThe wireless KO gas combination detector 433 Mhz represents a new generation of gas detectors. It is handy and small\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e(75x55x28mm\u003c\/em\u003e\u003c\/strong\u003e, about the size of a pack of cigarettes), but full of the latest technology.\u003cbr\u003e\u003cbr\u003eDetects gases and hazardous vapors such as\u003c\/p\u003e: \u003cul\u003e \u003cli\u003ePropane\u003c\/li\u003e \u003cli\u003ebutane\u003c\/li\u003e \u003cli\u003enatural gas\u003c\/li\u003e \u003cli\u003etown gas\u003c\/li\u003e \u003cli\u003enarcotic gas\u003c\/li\u003e \u003cli\u003emethane\u003c\/li\u003e \u003cli\u003eNitro thinner\u003c\/li\u003e \u003cli\u003egasoline\u003c\/li\u003e \u003cli\u003eether\u003c\/li\u003e \u003cli\u003ealcohol\u003c\/li\u003e \u003cli\u003eAdhesive vapors etc.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eRuns via USB-C, a 3m connection cable and a 230V to USB-C adapter are included. \u003cbr\u003e(It can also be plugged directly into a USB socket in the camper)\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e the combi detector-433\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot only reports a gas alarm\u003c\/strong\u003e, but\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ealso\u003c\/strong\u003e\u003c\/p\u003e reports \u003cp align=\"left\"\u003e\u003cstrong\u003ewhen the ambient air\u003c\/strong\u003e is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOK again\u003c\/strong\u003e. This provides double safety.\u003cbr\u003e\u003cbr\u003eThe Combi Alarm Detector-433 is operated with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emains power from a 5V DC power supply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(smartphone charger), a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eemergency battery\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis included, which\u003cstrong\u003ebridges\u003c\/strong\u003e a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epower failure for up to 4 hours\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003eThe power consumption is 200 mAh. The alarm triggering can be set between 100 and 10,000 ppm (particles per million), making it possible to set the triggering threshold as required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant installation instructions for gas detectors\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eCorrect installation is the most important prerequisite for reliable operation. Particular attention must be paid to the properties between the gases. Select the installation location that corresponds to the type of gas that could occur on site. For combination gas detectors and the aim of monitoring different gases, it is advisable to install them at medium room height, approx. 1 -1.5 m above the floor.\u003cbr\u003e\u003cbr\u003eThe suppliers add an odorant to the gas so that escaping gas is detected as early as possible, but the sense of smell is switched off when we are asleep, which is why gas detectors are so important.\u003cbr\u003ePriority should always be given to the installation height that best meets the desired monitoring objective.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eAn example:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou use propane gas in your caravan and install a combination smoke detector for propane gas and CO gas. Since propane gas is the primary source of danger, but the beds are at a height of approx. 60-80 cm above the floor, the gas detector should be installed at a height of approx. 50 cm above the floor (average height between 30 cm for pure propane gas detectors and 1 m for pure CO gas detectors). CO gas is about as heavy as air and is therefore distributed almost evenly in the air. The gas detector for detecting propane and CO gas can therefore be installed at this height.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNatural and town gas:\u003c\/strong\u003e\u003cbr\u003eThese gases are lighter than air and therefore rise to the ceiling, which is why they should be installed at a height of around 30-50 cm below the ceiling. The distance to the source of danger should not be more than six meters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLiquid gas such as propane, butane, anaesthetic gas:\u003c\/strong\u003e\u003cbr\u003eThese gases are heavier than air and sink to the floor in living spaces and camping vehicles.  They must therefore be installed at a maximum height of 30 cm above the floor. The distance from the source of danger should not be more than 3 - 4 meters.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCO gas (carbon monoxide)\u003c\/li\u003e \u003cli\u003eCO gas is odorless, invisible and highly toxic. This is what makes CO gas so dangerous.\u003c\/li\u003e \u003cli\u003eCO detectors should ideally be installed in closed rooms at a height of approx. 100 cm above the floor, at a maximum distance of 3 - 4 meters from the source of the fire.\u003c\/li\u003e \u003cli\u003eCO gas spreads is fairly evenly distributed in the air, which is why it can be installed in areas between 50 cm and 150 cm above the floor.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eGeneral information:\u003c\/strong\u003e\u003cbr\u003eDo not install the gas detector near doors, windows or extractor hoods, as the actual gas content of the air cannot be reliably measured in their vicinity.  Avoid placing it directly next to the gas source or in places with a high level of dust or humidity. Also make sure that the gas detectors cannot be reached by children \/ pets and that no paints, varnishes, solvents or cleaning agents are stored near them. Gas detectors are also triggered, for example, when hairspray is used, as the propellant gases from the spray can are also detected. Gases produced during baking can also trigger the gas detector. Please note that a combination gas detector is always a compromise to individual gas detectors specially designed for the respective gas.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e:\u003c\/p\u003e \u003cp\u003eTriGasPro 433Mhz\u003cbr\u003eUSB power cable\u003cbr\u003e\u003c\/p\u003e 5V \u003cp\u003epower supply unit for 110-230V socket\u003cbr\u003eMounting material\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003c!----\u003e","brand":"waerchzueg.ch","offers":[{"title":"Default Title","offer_id":48843778031784,"sku":"901208","price":99.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8347\/3708\/files\/trigaspro_multi.webp?v=1779977363","url":"https:\/\/www.waerchzueg.ch\/en\/products\/trigaspro-multi-gas-detector-carpro-tec","provider":"waerchzueg.ch","version":"1.0","type":"link"}