{"product_id":"wasserheizstab-campingstar-12v-100-w-fur-kanister-mit-offenen-kabelenden","title":"CampingStar 12V \/ 100 W Water Heating Element for Canisters, with Open Cable Ends","description":"\u003cp\u003e\u003cstrong\u003eThe CampingStar water heating element heats your domestic water directly in the canister.\u003c\/strong\u003e Simply place it flat on the bottom of the canister, connect it to a 12-volt power source—the built-in thermostat brings the water up to about 38 °C and maintains that temperature. With a canister capacity of about 10–15 liters, this provides you with comfortably warm water for washing, without the need for a boiler or permanent installation.\u003c\/p\u003e \u003cp\u003eThis model is the \u003cstrong\u003e12-volt version with 100 watts\u003c\/strong\u003e and has \u003cstrong\u003etwo open cable ends\u003c\/strong\u003e. So you connect them yourself to your vehicle’s electrical system—brown is positive, blue is negative.\u003c\/p\u003e \u003ch3\u003eUse in a camper\u003c\/h3\u003e \u003cul\u003e   \u003cli\u003eHot Water in Camper Vans and Conversions with Canister Water Supply\u003c\/li\u003e   \u003cli\u003eWater for washing dishes, handwashing, or an outdoor shower\u003c\/li\u003e   \u003cli\u003eRetrofit solution without drilling, cutting, or tank modification—the heating element remains portable and can be removed from the canister at any time\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eConnection and Fuse Protection\u003c\/h3\u003e \u003cul\u003e   \u003cli\u003eSuitable only for 12 V DC\u003c\/li\u003e   \u003cli\u003eCurrent draw approx. 8 A – select wire gauge and fuse accordingly\u003c\/li\u003e   \u003cli\u003eUse only 12-volt plugs with screw terminals and a minimum rating of 10 A\u003c\/li\u003e   \u003cli\u003eThe cable ends are crimped or screwed, not soldered\u003c\/li\u003e   \u003cli\u003eDue to power consumption, it is best to operate the unit while driving or, when stationary, to use a sufficiently sized auxiliary battery to provide backup power\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHere’s how to proceed\u003c\/h3\u003e \u003col\u003e   \u003cli\u003eFill the canister with water—warm water significantly reduces the heating time\u003c\/li\u003e   \u003cli\u003ePlace the heating element flat on the bottom of the container; do not stand it upright\u003c\/li\u003e   \u003cli\u003eOnly then connect the power supply\u003c\/li\u003e   \u003cli\u003eRemove limescale deposits regularly—always disconnect the power supply first\u003c\/li\u003e \u003c\/ol\u003e \u003ch3\u003eSafety Instructions\u003c\/h3\u003e \u003cul\u003e   \u003cli\u003eThe heating element must always be completely covered with water; otherwise, the thermostat will not work\u003c\/li\u003e   \u003cli\u003ePosition the water intake (pump or suction hose) at least 10 cm above the heating element\u003c\/li\u003e   \u003cli\u003eDo not remove the white Teflon ring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eAt a Glance\u003c\/h3\u003e \u003cul\u003e   \u003cli\u003eVoltage: 12 V DC\u003c\/li\u003e   \u003cli\u003ePower: 100 W\u003c\/li\u003e   \u003cli\u003eCurrent draw: approx. 8 A\u003c\/li\u003e   \u003cli\u003eWater temperature: approx. 38 °C, thermostat-controlled (for a canister capacity of approx. 10–15 l)\u003c\/li\u003e   \u003cli\u003eDimensions: Ø 1.2 cm, length 26 cm\u003c\/li\u003e   \u003cli\u003eConnection cable: approx. 145 cm, 2 open cable ends (brown = positive, blue = negative)\u003c\/li\u003e   \u003cli\u003eManufactured in accordance with CE regulations, made in Germany\u003c\/li\u003e   \u003cli\u003ePackage contents: 1 heating element\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHow hot does the water get?\u003c\/strong\u003e\u003cbr\u003e The control thermostat maintains the water at around 38 °C. This is washing temperature, not boiling water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDoes the heating element fit in any canister?\u003c\/strong\u003e\u003cbr\u003e With a diameter of 1.2 cm and a length of 26 cm, it fits through most wide-mouth openings. It’s important that it can lie flat on the bottom and be completely covered with water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need a plug?\u003c\/strong\u003e\u003cbr\u003e This model has two open cable ends. You can connect them directly to your 12-V vehicle electrical system or install your own plug with a screw terminal rated for at least 10 A.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I leave the heating element in the canister permanently?\u003c\/strong\u003e\u003cbr\u003e Yes, it’s designed for use inside the canister. Remove it for descaling and cleaning, and always disconnect the power first.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow long does it take to heat up?\u003c\/strong\u003e\u003cbr\u003e That depends on the starting temperature and the amount of water in the container. If you fill it with water that’s already warm, the target temperature will be reached much faster.\u003c\/p\u003e","brand":"waerchzueg.ch","offers":[{"title":"Default Title","offer_id":56408489165179,"sku":"67138","price":139.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8347\/3708\/files\/67138-removebg.jpg?v=1788792019","url":"https:\/\/www.waerchzueg.ch\/en\/products\/campingstar-12v-100-w-water-heating-element-for-canisters-with-open-cable-ends","provider":"waerchzueg.ch","version":"1.0","type":"link"}